trensim.comSimulación Ferroviaria
   

New patch 1.5.4 for MSTS Non-official

Foro para discusión en general sobre MSTS

Moderador: Moderadores

Notapor sorcek » Mié May 24, 2006 11:11 am

Sigo con mis pruevas: Ahora me he metido con las luces.

He descubierto que los conos de luz se invierten al canviar de cabina y ya no es necesario hacer que el cono de luz empieze muy lejos del tren para simular que las luces enfocan hacia atrás. Os dejo el esquema de luces de la 289.012. Tambien sirve para cualquier 8900 creedme, funciona y lo tengo provado.

Lights ( 24

Light (
comment( Sphere of light cab1 )
Type ( 1 )
Conditions (
Headlight ( 2 )
Unit ( 2 )
)
Cycle ( 0 )
FadeIn ( 0.1 )
FadeOut ( 0.1 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( 55ffffcf )
Position ( 0.0 5.00 8.3 )
Transition ( 0 )
Radius ( 150.0 )
Angle ( 15.0 )

)
)
)
Light (
comment( Sphere of light cab2 )
Type ( 1 )
Conditions (
Headlight ( 2 )
Unit ( 4 )
)
Cycle ( 0 )
FadeIn ( 0.1 )
FadeOut ( 0.1 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( 55ffffcf )
Position ( 0.0 5.00 -8.3 )
Transition ( 0 )
Radius ( 150.0 )
Angle ( 15.0 )

)
)
)
Light (
comment( Sphere of light cab1 )
Type ( 1 )
Conditions (
Headlight ( 3 )
Unit ( 2 )
)
Cycle ( 0 )
FadeIn ( 0.1 )
FadeOut ( 0.5 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( d8fffddd )
Position ( 0.0 5.00 8.3 )
Transition ( 0 )
Radius ( 500.0 )
Angle ( 15.0 )

)
)
)
Light (
comment( Sphere of light cab2 )
Type ( 1 )
Conditions (
Headlight ( 3 )
Unit ( 4 )
)
Cycle ( 0 )
FadeIn ( 0.1 )
FadeOut ( 0.5 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( d8fffddd )
Position ( 0.0 5.00 -8.3 )
Transition ( 0 )
Radius ( 500.0 )
Angle ( 15.0 )

)
)
)

Light (
comment( PosicionIzq )
Type ( 0 )
Conditions (
Headlight ( 2 )
Unit ( 2 )
)
FadeIn ( 0.2 )
FadeOut ( 0.5 )
Cycle ( 0 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( 80ffffbb )
Position ( 0.10 3.75 8.36 )
Azimuth ( 0.0 0.0 0.0 )
Transition ( 0 )
Radius ( 0.9 )
)
)
)
Light (
comment( PosicionIzq cab2 )
Type ( 0 )
Conditions (
Headlight ( 2 )
Unit ( 5 )
)
FadeIn ( 0.2 )
FadeOut ( 0.5 )
Cycle ( 0 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( 80ffffbb )
Position ( 0.10 3.75 -8.36 )
Azimuth ( 180.0 180.0 180.0 )
Transition ( 0 )
Radius ( 0.9 )
)
)
)
Light (
comment( PosicionDer )
Type ( 0 )
Conditions (
Headlight ( 2 )
Unit ( 2 )
)
FadeIn ( 0.2 )
FadeOut ( 0.5 )
Cycle ( 0 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( 80ffffbb )
Position ( -0.10 3.75 8.36 )
Azimuth ( 0.0 0.0 0.0 )
Transition ( 0 )
Radius ( 0.9 )
)
)
)
Light (
comment( PosicionDer cab2 )
Type ( 0 )
Conditions (
Headlight ( 2 )
Unit ( 5 )
)
FadeIn ( 0.2 )
FadeOut ( 0.5 )
Cycle ( 0 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( 80ffffbb )
Position ( -0.10 3.75 -8.36 )
Azimuth ( 180.0 180.0 180.0 )
Transition ( 0 )
Radius ( 0.9 )
)
)
)
Light (
comment( PosicionIzq1 )
Type ( 0 )
Conditions (
Headlight ( 3 )
Unit ( 2 )
)
FadeIn ( 0.2 )
FadeOut ( 0.5 )
Cycle ( 0 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( d8fffddd )
Position ( 0.10 3.75 8.36 )
Azimuth ( 0.0 0.0 0.0 )
Transition ( 0 )
Radius ( 0.9 )
)
)
)
Light (
comment( PosicionIzq1 cab2 )
Type ( 0 )
Conditions (
Headlight ( 3 )
Unit ( 5 )
)
FadeIn ( 0.2 )
FadeOut ( 0.5 )
Cycle ( 0 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( d8fffddd )
Position ( 0.10 3.75 -8.36 )
Azimuth ( 180.0 180.0 180.0 )
Transition ( 0 )
Radius ( 0.9 )
)
)
)
Light (
comment( PosicionDer1 )
Type ( 0 )
Conditions (
Headlight ( 3 )
Unit ( 2 )
)
FadeIn ( 0.2 )
FadeOut ( 0.5 )
Cycle ( 0 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( d8fffddd)
Position ( -0.10 3.75 8.36 )
Azimuth ( 0.0 0.0 0.0 )
Transition ( 0 )
Radius ( 0.9 )
)
)
)
Light (
comment( PosicionDer1 cab2)
Type ( 0 )
Conditions (
Headlight ( 3 )
Unit ( 5 )
)
FadeIn ( 0.2 )
FadeOut ( 0.5 )
Cycle ( 0 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( d8fffddd)
Position ( -0.10 3.75 -8.36 )
Azimuth ( 180.0 180.0 180.0 )
Transition ( 0 )
Radius ( 0.9 )
)
)
)

Light (
comment( AlcanceIzq )
Type ( 0 )
Conditions (
Headlight ( 3 )
Unit ( 2 )
)
FadeIn ( 0.2 )
FadeOut ( 0.5 )
Cycle ( 0 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( d8fffddd )
Position ( 0.97 1.8 8.25 )
Azimuth ( 0.0 0.0 0.0 )
Transition ( 0 )
Radius ( 0.8 )
)
)
)
Light (
comment( AlcanceIzq cab2 )
Type ( 0 )
Conditions (
Headlight ( 3 )
Unit ( 5 )
)
FadeIn ( 0.2 )
FadeOut ( 0.5 )
Cycle ( 0 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( d8fffddd )
Position ( 0.97 1.8 -8.25 )
Azimuth ( 180.0 180.0 180.0 )
Transition ( 0 )
Radius ( 0.8 )
)
)
)

Light (
comment( AlcanceDer )
Type ( 0 )
Conditions (
Headlight ( 3 )
Unit ( 2 )
)
FadeIn ( 0.2 )
FadeOut ( 0.5 )
Cycle ( 0 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( d8fffddd )
Position ( -0.97 1.8 8.25 )
Azimuth ( 0.0 0.0 0.0 )
Transition ( 0 )
Radius ( 0.8 )

)
)
)
Light (
comment( AlcanceDer cab2 )
Type ( 0 )
Conditions (
Headlight ( 3 )
Unit ( 5 )
)
FadeIn ( 0.2 )
FadeOut ( 0.5 )
Cycle ( 0 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( d8fffddd )
Position ( -0.97 1.8 -8.25 )
Azimuth ( 180.0 180.0 180.0 )
Transition ( 0 )
Radius ( 0.8 )

)
)
)

Light (
comment( ColaIzq )
Type ( 0 )
Conditions (
Headlight ( 2 )
Unit ( 3 )
)
FadeIn ( 0.1 )
FadeOut ( 0.2 )
Cycle ( 0 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( b0ff0000 )
Position ( 0.5 1.785 -8.3 )
Azimuth ( -180 -180 -180 )
Transition ( 0 )
Radius ( 0.8 )

)
)
)
Light (
comment( ColaIzq cab2 )
Type ( 0 )
Conditions (
Headlight ( 2 )
Unit ( 4 )
)
FadeIn ( 0.1 )
FadeOut ( 0.2 )
Cycle ( 0 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( b0ff0000 )
Position ( 0.5 1.785 8.3 )
Azimuth ( 0 0 0 )
Transition ( 0 )
Radius ( 0.8 )

)
)
)

Light (
comment( ColaDer )
Type ( 0 )
Conditions (
Headlight ( 2 )
Unit ( 3 )
)
FadeIn ( 0.1 )
FadeOut ( 0.2 )
Cycle ( 0 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( b0ff0000 )
Position ( -0.5 1.785 -8.3 )
Azimuth ( -180 -180 -180 )
Transition ( 0 )
Radius ( 0.8 )

)
)
)
Light (
comment( ColaDer cab2 )
Type ( 0 )
Conditions (
Headlight ( 2 )
Unit ( 4 )
)
FadeIn ( 0.1 )
FadeOut ( 0.2 )
Cycle ( 0 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( b0ff0000 )
Position ( -0.5 1.785 8.3 )
Azimuth ( 0 0 0 )
Transition ( 0 )
Radius ( 0.8 )

)
)
)
Light (
comment( ColaIzq1 cab2 )
Type ( 0 )
Conditions (
Headlight ( 3 )
Unit ( 4)
)
FadeIn ( 0.1 )
FadeOut ( 0.2 )
Cycle ( 0 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( b0ff0000 )
Position ( 0.5 1.785 8.3 )
Azimuth ( 0 0 0 )
Transition ( 0 )
Radius ( 0.8 )

)
)
)
Light (
comment( ColaIzq1 )
Type ( 0 )
Conditions (
Headlight ( 3 )
Unit ( 3 )
)
FadeIn ( 0.1 )
FadeOut ( 0.2 )
Cycle ( 0 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( b0ff0000 )
Position ( 0.5 1.785 -8.3 )
Azimuth ( 180 180 180 )
Transition ( 0 )
Radius ( 0.8 )

)
)
)

Light (
comment( ColaDer1 )
Type ( 0 )
Conditions (
Headlight ( 3 )
Unit ( 3 )
)
FadeIn ( 0.1 )
FadeOut ( 0.2 )
Cycle ( 0 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( b0ff0000 )
Position ( -0.5 1.785 -8.3 )
Azimuth ( -180 -180 -180 )
Transition ( 0 )
Radius ( 0.8 )

)
)
)
Light (
comment( ColaDer1 cab2 )
Type ( 0 )
Conditions (
Headlight ( 3 )
Unit ( 4 )
)
FadeIn ( 0.1 )
FadeOut ( 0.2 )
Cycle ( 0 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( b0ff0000 )
Position ( -0.5 1.785 8.3 )
Azimuth ( 0 0 0 )
Transition ( 0 )
Radius ( 0.8 )

)
)
)

)

SALUDOS
Avatar de Usuario
sorcek
 
Mensajes: 872
Registrado: Lun Feb 07, 2005 6:01 pm
Ubicación: Barcelona

Notapor busferro » Jue May 25, 2006 11:01 am

Hola Sorcek. Ayer cuando llegue a casa probe este esquema de luces en la susodicha 289 y al cambiar de cabina en la delantera se ponian las luces rojas pero en la trasera no se encendian las blancas. :? ¿A que puede ser debido?. Es que yo con esto de las luces me hago un lio impresionante. Intente arreglar las de alguna loco pero al final me lio con los parametros y lo dejo.
Un saludo

Arturo Ares

MSTS: Vale más malo conocido que bueno por conocer.
Avatar de Usuario
busferro
 
Mensajes: 1968
Registrado: Sab Jun 11, 2005 10:11 am
Ubicación: Cambre-La Coruña

Notapor sorcek » Jue May 25, 2006 3:28 pm

Busferro, ¿iba la máquina por cola o sola?

Piensa que las luces blancas se encenderán para conducir desde la cabina 2, y por lo tanto no debe de haber nada delante suyo.

SALUDOS
Avatar de Usuario
sorcek
 
Mensajes: 872
Registrado: Lun Feb 07, 2005 6:01 pm
Ubicación: Barcelona

Notapor busferro » Jue May 25, 2006 4:20 pm

Gracias. Ahora que lo dices llevaba un TECO de esas que traen las actividades. Fue en C&GL en modo de exploracion de rutas. :lol: :wink:
Un saludo

Arturo Ares

MSTS: Vale más malo conocido que bueno por conocer.
Avatar de Usuario
busferro
 
Mensajes: 1968
Registrado: Sab Jun 11, 2005 10:11 am
Ubicación: Cambre-La Coruña

Notapor rodaliesdriver » Vie May 26, 2006 9:05 pm

Hola,

A mí me ocurre lo mismo que a Carthago, és decir, la visualización de texturas más oscuras al entrar en los túneles me van perfectamente. Sin embargo, a la hora de implementar las 2 cabinas, solo visualizo la trasera.
He seguido las instrucciones que ha dado Ardennes con el cvf. de la 319 y me pasa eso. Lo único que se me ocurre es, que en vez de sustituir los parametros que daba en azul, hubiera que añadirlos. Per no creo...

Bueno aver si podeis ayudarnos!. Venga un saludo y hasta otra.
Un Saludo. Ferran Puig Marqués.
Avatar de Usuario
rodaliesdriver
 
Mensajes: 125
Registrado: Dom May 09, 2004 6:42 pm
Ubicación: Borriol (Castelló)

Notapor sorcek » Dom May 28, 2006 12:37 pm

Para implementar la segunda cabina, no hay que sustituir nada, sino crear nuevas posiciones y direcciones para la nueva cabina, pero repito:
No sustituir nada

SALUDOS
Avatar de Usuario
sorcek
 
Mensajes: 872
Registrado: Lun Feb 07, 2005 6:01 pm
Ubicación: Barcelona

Notapor rodaliesdriver » Dom May 28, 2006 4:14 pm

Hola a todos,

Bueno decir que el problema está solucionado. El error que cometía era el de sustituir en vez de añadir los parametros.

Gracias a sorcek y a Carthago por haberme solventado el problema.


Saludos!
Un Saludo. Ferran Puig Marqués.
Avatar de Usuario
rodaliesdriver
 
Mensajes: 125
Registrado: Dom May 09, 2004 6:42 pm
Ubicación: Borriol (Castelló)

Notapor Agamen0n » Dom Jun 11, 2006 11:29 am

Hola a todos,

Para empezar mi emhorabuena por esta pedazo de web y foro, donde tantas cosas he aprendido ya en poco espacio de tiempo.

Gracias por la info de ese parche que voy a bajarme y probar.


Un saludo

Juan
Esos momentos tan supermaños como ir en burra por las vías del AVE y gritarle al tren cuando se aproxima a 250 km/hora "chufla, chufla, que como no te apartes tú".
Avatar de Usuario
Agamen0n
 
Mensajes: 2
Registrado: Dom Jun 11, 2006 10:41 am
Ubicación: Madrid-Zaragoza-Huesca - Lerida (Como el AVE)

Notapor busferro » Mar Jun 27, 2006 8:29 pm

Hola, el otro dia se me dio por retocar la cabina de la 354 con este parche y me funciona pero me queda la vista trasera como veis en el adjunto, busque y rebusque en el foro pero no encontre nada con que corregirlo :cry: Si sabe alquien como solucionarlo agradeceria que me lo aclararan.
Un saludo

Arturo Ares

MSTS: Vale más malo conocido que bueno por conocer.
Avatar de Usuario
busferro
 
Mensajes: 1968
Registrado: Sab Jun 11, 2005 10:11 am
Ubicación: Cambre-La Coruña

Notapor McKane » Mar Jun 27, 2006 8:40 pm

Hola busferro,

se me ocurren dos cosas:
:arrow: que no sumaras 100 en el consist (en la línea nextwagonUID, creo recordar)
:arrow: que no le dieras la vuelta a la cabina, es decir, sumar 180º cuando copias la posición de la cabina

un saludo
Avatar de Usuario
McKane
 
Mensajes: 1407
Registrado: Jue Ago 25, 2005 1:54 pm
Ubicación: Madrid

Notapor busferro » Mar Jun 27, 2006 8:56 pm

Hola Mckane, gracias por la respuesta rapida. El segundo punto que indicas si que lo hice. Probare con el primero y ya te dire. :wink:
Un saludo

Arturo Ares

MSTS: Vale más malo conocido que bueno por conocer.
Avatar de Usuario
busferro
 
Mensajes: 1968
Registrado: Sab Jun 11, 2005 10:11 am
Ubicación: Cambre-La Coruña

Notapor McKane » Mar Jun 27, 2006 9:02 pm

de todas formas te va a salir la cabina de la 354, te lo digo porque hice un experimento con un consist AVE+TGV Duplex y era siempre la cabina del AVE
Avatar de Usuario
McKane
 
Mensajes: 1407
Registrado: Jue Ago 25, 2005 1:54 pm
Ubicación: Madrid

Notapor sorcek » Mar Jun 27, 2006 11:28 pm

Pasame la cabina que te la arreglo :wink: .

Necesito estudiarme el CFV para encontrar el fallo, pero se me ocurren un par de cosas.

SALUDOS
Avatar de Usuario
sorcek
 
Mensajes: 872
Registrado: Lun Feb 07, 2005 6:01 pm
Ubicación: Barcelona

Notapor busferro » Mié Jun 28, 2006 8:04 pm

Hola Sorcek. Ya te lo he enviado por MP. :wink:
Un saludo

Arturo Ares

MSTS: Vale más malo conocido que bueno por conocer.
Avatar de Usuario
busferro
 
Mensajes: 1968
Registrado: Sab Jun 11, 2005 10:11 am
Ubicación: Cambre-La Coruña

de donde no hay no se puede sacar

Notapor REGIONAL » Jue Jun 29, 2006 11:38 am

está claro, cuando uno no entiende, no sabe na. No consigo hacer que el parche este funcione, no tengo ni idea como ni dónde se sustituye lo azul.
Necesito ayuda.
Gracias.
Avatar de Usuario
REGIONAL
 
Mensajes: 82
Registrado: Lun Jul 25, 2005 12:40 pm
Ubicación: Cáceres, Extremadura

AnteriorSiguiente

Volver a MSTS

¿Quién está conectado?

Usuarios navegando por este Foro: No hay usuarios registrados visitando el Foro y 77 invitados